Technosystem Engineering SpLTD®
Compressed Air ReservoirsHeat Exchange EquipmentReservoirsBoilersAccumulatorsOthers
Download our complete catalog with technical specificationsDownload PDF
Product overviewVertical or horizontal compressed air storage tanks and reservoirs made of carbon or stainless still with a maximum with a capacity between 150l and 160 000l. The maximum working pressure depends on customers specifications and it ranges from 8 bar to 40 bar. The vessels are equipped with drain ports on the bottom to remove condensation and can be supplied with mounting plate to secure motors, pumps and other components.
Product overviewWe manufacture custom made heat exchange equipment made of carbon or stainless steel. Product specifications vary depending on customers requirement, but some general characteristics can be found below:
Saturated water vapor: 0,25 MPa
Heated water: 0.8 MPa
Saturated water vapor: 140C
Heated water: 70-90C
Product overviewCylindrical or rectangular tanks for the storage of liquid derivatives (fuel oil/water), suitable for above ground or underground installations. Their maximum capacity is 50m3 and they are made of carbon steel or stainless steel. The reservoirs are covered with an anticorrosion inner lay and alkydprimer and they offer bituminous waterproofing.
Product overviewWater and steam boilers (vertical or horizontal) with a volume up to 5000l, manufactured by carbon steel or stainless steel and covered with alkydprimer. They provide electrical heating with a high efficiency, typically used for domestic hot water purposes. The boilers offer a maximum working pressure capability of 10 bar and support a maximum temperature of 45 C. Customers can also opt for a vertically aligned boiler made of serpentine and maximum volume of 3000l.
Product overviewVertical or horizontal accumulators for hot and cold water storage with a capacity of up to 5000l. They are made of carbon steel or stainless steel, covered with an anticorrosion inner layer and alkydprimer. The accumulators support a maximum working pressure of 10 bar and a maximum temperature of 65C.
Product overviewThe following products are designed and manufactured according to customers specification.
- District Heating stations
- Sedimentation filter
- Precipitation tank