Products
Compressed Air ReservoirsHeat Exchange EquipmentReservoirsBoilersAccumulatorsElbiOthers
Product overview
Vertical or horizontal compressed air storage tanks and reservoirs made of carbon or stainless still with a maximum with a capacity between 150l and 160 000l. The maximum working pressure depends on customers specifications and it ranges from 8 bar to 40 bar. The vessels are equipped with drain ports on the bottom to remove condensation and can be supplied with mounting plate to secure motors, pumps and other components.Product overview
We manufacture custom made heat exchange equipment made of carbon or stainless steel. Product specifications vary depending on customers requirement, but some general characteristics can be found below:Operational pressure:
Saturated water vapor: 0,25 MPa
Heated water: 0.8 MPa
Operational temperature:
Saturated water vapor: 140C
Heated water: 70-90C
Product overview
Cylindrical or rectangular tanks for the storage of liquid derivatives (fuel oil/water), suitable for above ground or underground installations. Their maximum capacity is 50m3 and they are made of carbon steel or stainless steel. The reservoirs are covered with an anticorrosion inner lay and alkydprimer and they offer bituminous waterproofing.Product overview
Water and steam boilers (vertical or horizontal) with a volume up to 5000l, manufactured by carbon steel or stainless steel and covered with alkydprimer. They provide electrical heating with a high efficiency, typically used for domestic hot water purposes. The boilers offer a maximum working pressure capability of 10 bar and support a maximum temperature of 45 C. Customers can also opt for a vertically aligned boiler made of serpentine and maximum volume of 3000l.Product overview
Vertical or horizontal accumulators for hot and cold water storage with a capacity of up to 5000l. They are made of carbon steel or stainless steel, covered with an anticorrosion inner layer and alkydprimer. The accumulators support a maximum working pressure of 10 bar and a maximum temperature of 65C.
Technosystem Engineering Ltd. is an official representative of the Italian company ELBI.
The wide range of ELBI products meets the needs of both small domestic installations and large industrial installations.
ELBI is certified according to the UNI EN ISO 9001:2008 quality system.
The tanks are designed according to PED (Pressure Equipment Directive) or ASME standards, CE marked, available with WRAS, ACS, TÜV, WRc, NSF, IAPMO, TTK and other international certifications.
We offer the following products by catalogue:
- Membrane sanitary water vessels
- Multi-purpose heating tanks
- Expansion tanks for heating/air conditioning
- Tanks for solar systems
- Cold water tanks (galvanized/glazed)
- Hot water tanks
- ASME tanks
Product overview
The following products are designed and manufactured according to customers specification.- District Heating stations
- Sedimentation filter
- Precipitation tank